13
EX
-
6084
English
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
6. Driver Installation
1. The DIP
-
Switch 1 is set to ON and the DIP
-
Switches 2, 3 & 4 are set to OFF.
2. The EX
-
6084 is properly installed in the PCI
-
Express slot.
3. Now you can start the PC.
4. Your operating system automatically detects the EX
-
6084 and opens the following
window.
5. Now run the
„Run RTK_NIC_DRIVER_INSTALLER.sfx.exe“
and follow the instruc
-
tions of the installation manager.
6. After successful installation, the Ethernet Port 1 will be listed as
„Ethernet Port #1“
in the device manager.
7. Now turn off the system and set the DIP
-
Switch 2 to ON, while the DIP
-
Switch 3 & 4
remain in the OFF position. Now start your system. The operating system will be
install automatically the Ethernet Port 2 and it will be also listed as
„Ethernet Port
#2“
in the device manager. If the installation Fails, please reset the DIP
-
Switch
to OFF and then set it to ON again and reboot your system!
8. Now continue with the DIP
-
Switch 3 as described in step 7!
9. Now continue with the DIP
-
Switch 4 as described in step 7!
