Exsys EX-44384, Руководство пользователя

Страница: 15 / 17

15
EX - 44384 English
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
6. Driver Installation
CHECK INSTALLED DRIVER
Open the > Device manager <. Now you should see at „ Ports (COM & LPT) “ and at
„ Multifunction Adapter “ the following new entry's:
If you see this or a similar information the device is installed correctly.
CHANGE PORT NUMBER
If you like to change the port number for example COM3 to COM5, open the „ Device
Manager ” click at „ COM3 ”, „ Settings ” and then „ Advance ”. There you can change be-
tween COM3 till COM256.
Windows Server 20xx
After completing the hardware installation, the operating system will automatically the
card and install this! If the driver should not be installed automatically, insert the driver
CD into you CD
- ROM drive (eg drive D:) and then open the folder „ IO/SYSTEMBASE/
DRIVERS/PCI(PCIe Bridge) “. Please select the folder with your operating system and
install the driver (see Picture). Follow the hardware assistant and finish the installation.
Important! Restart your PC in any case after installing the drivers.
Use the following driver for the following Windows Server Version.
Windows Server 2003 = XP Driver
Windows Server 2008 = VISTA Driver
Windows Server 2008R2 = Windows 7 Driver
Windows Server 2012 = Windows 8.x Driver
Windows Server 2012R2 = Windows 10 Driver
CHECK INSTALLED DRIVER
Open the > Device manager <. Now you should see at „ Ports (COM & LPT) “ and at
„ Multifunction Adapter “ the following new entry's:
If you see this or a similar information the device is installed correctly.