12
English
EX
-
44384
© Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Layout & Connections
4. Jumper Settings
3.2
Connections
JP3:
DIS
=
The function PME is disable.
(Factory Setting)
ENA
= The function PME is enable. Now the card can be activate
the computer through the serial ports.
But this should not be adjusted for standard applications.
There are two different voltage sources (Mainboard & Power Supply).
(If the jumper JP1 set to X5 / X12 then the power connector J2 must be
connected with the PC power supply)
X5
=
5Volt from Power Supply
(Factory Setting)
X12
=
12Volt from Power Supply
I12
=
12Volt from Mainboard
(Factory Setting)
I12 X12 X5
JP1:
DIS
J2:
+5V
GND
GND
+12V
For aux power (JP1), J2 must be connected to pc power
supply! If not the card won’t work.
ENA
Содержание EX-44384
Страница 17: ......
