Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
18
Assembly page 18/44
Fax +32 2 359 95 50
ASSEMBLING THE VACUUM CLEANER
Remove the packaging from the appliance and its attachments.
Your appliance contains following attachments:
charger
floor brush
crevice tool/upholstery brush
stick
The dust collector always has to be attached to the motor unit before using the
appliance. If the dust collector is not mounted, attach it to the motor unit and make sure it
fits
into place.
You can use the vacuum cleaner in two ways:
1)
You can use the appliance without stick as handheld vacuum cleaner.
2)
Attach the stick to the body of the appliance
until it clicks into place. Then you can
use the appliance as a stick vacuum cleaner.
3)
To remove the stick, press the stick release button and pull the appliance out.
Attach the desired suction tool (floor brush, small upholstery brush or crevice tool) to the
suction opening of the dust collector if necessary.