Expressive SAS Expressive E Touche, Руководство пользователя

Страница: 8 / 29

2.2.3. Skin
The wooden surface at the top of Touché is conceived to give you a great, smooth instrumental touch. This skin is
magnetised in order to be removed and locked easily, making an easy access to the
Cylinder and the Slider
underneath.
Be careful when replacing it, it must be put in the right position.
The Cylinder must face the two little wooden parts, otherwise the skin won't be properly magnetised.
2.2.4. Cylinders
The top and bottom Shi ft ings use cylinders, which are responsible for Touché's pressure feedback.
One is located just under the Skin , another is underneath Touché, inside the little trapdoor.
Both cylinders can be removed from their support by releasing them from their rail. Do not try to take them o ff
directly by pulling them or you might irreversibly damage them.
2.2.5. Slider
Under the Skin , you will find a Slider which allows you to adjust the sensitivity of the le ft and right Shi ft ings .
• By placing the Slider on the bottom position, it will loosen the right and le
ft Shi ft ings .
• By placing the Slider on the upper position, it will sti
ff en the right and le ft Shi ft ings
Learn more in the Adjusting your sensitivity section.
Expressive E Touché User Manual v.1.1 Page of 8 29