c - Check the welding cables if they are connected correctly or not.
d - Welding sparks and spatters may cause fire. For this reason avoid keeping flammable
materials in the welding environment.
6 - Open the "On/Off Switch" (5).
7 - Adjust the average welding current value with "Welding Current Control Button" (4) and due to
electrode diameter, type, welding position and electrode information sheet. Generally the
welding current is between the values that is mentioned below. However it would be useful if
you adjust the stick welding electrode due to indicated values in the producer firm's catalogue.
This welding machine is designed for light welding processes performed by using 2.50
and 3.20 mm diameter rutile and basic stick electrodes.
Welding Currents for Rutile and Basic Type Coated Electrodes :
ø 2.5 mm : 70 - 100 A
ø 3.2 mm : 100 - 140 A
Welding current can be precisely adjusted due to welding condition while welding.
Supplied Accessories
Welding hammer and brush
Welding cable
Work cable
9
Preparation for Operation - 3
