Expolite ProPAR X3 COB, Руководство пользователя

Страница: 29 / 40

Activating Auto Programs
In the menu AUTO PROGRAM the automatic programs stored in the device are activated. The
programs AUTO1 to AUTO10 are permanently stored in the device. The programs PROGRAM1 to
PROGRAM10 are editable. This is described under Edit User Programs . Automatic programs are
transmitted as master to connected slave devices. For master-slave operation, signals are sent via
the DMX line. This may disturb other devices on the same line.
MENU
PERSON AUTO PROGRAM HSIC AUTO1
o
o
o
HSIC AUTO2
HSIC AUTO10
HSIC PROGRAM1
HSIC PROGRAM2
HSIC PROGRAM10
o
o
o
SPEED 0 - 255
Choose Run Mode
The operating mode is set in menu RUN MODE . For operation on a DMX-controller DMX needs to be
set. SLAVE sets the fixture into slave mode.
MENU
Edit User Programs
In the menu EDIT the user programs PROGRAM1 to PROGRAM10 can be edited.
Every program can have up to 10 steps ( SCENE-01 - SCENE-10 ). Every step persists of the
parameter colours RGBALC , STROBE „0-20Hz“, TIME and FADE .
User programs can be transfered to other fixtures (see master/slave).
Step-by-step programming of the custom stand-alone programs with up to 10 different steps:
NOTE: For less than 10 steps the TIME and FADE of the last step needs to be set to 0.
Example for time settings of a stand-alone programm with 3 steps:
Step 1
TIME = 4 FADE = 3
Step 2 TIME = 5 FADE = 2
Step 3 TIME = 0 FADE = 0
MENU
PERSON RUN MODE HSIC DMX
HSIC SLAVE
HSIC EDIT PROGRAM1
PROGRAM2
o
o
o
PROGRAM10
SCENE-01
SCENE-02
SCENE-10
o
o
o
RED
GREEN
BLUE
AMBER
LIME
CYAN
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
STROBE
TIME
0 - 255
0 - 255
FADE 0 - 255
E-29