Expolite LED25105, Руководство пользователя

Страница: 28 / 36

28
ENGLISH
3.10
SETTING ..this menu allows the user to adjust key operation settings for
this fixture.
Select
UPLOAD to upload the custom programs from the current MAS-
TER unit to the SLAVE units.
In order to reset custom modes to default values select RESET
NOTE: UC\RGBW\CALIB.C
can´t reset
COLOR
is for activate/unactivate the color calibration functions. When
RGBW is selected, on RGB = 255,255,255, the color is displayed as
calibrated in
CALIB.C -- RGBW . When COLOR is set OFF , on RGB =
255,255,255, the RGBvalues are not adjusted and the output is most
powerful. When
UC is selected, the RGB output are adjusted to a standard
preset universal color which balances fixtures from different generations.
NOTE: COLOR work only when choose NORMAL at FULL POWER CCT
Select DIM1, DIM2, DIM3 or DIM4 for different dimming speeds. (DIM4 is
the slowest dimming speed).
DMX ERROR Choose SAVE in order to save the last DMX data incase
of DMX signal error. Choose
BLACK
in order to blackout in case of DMX
signal error.
PWM_RATE is PWM reflesh rate bottom, press UP/DOWN to choose 600
HZ ; 1200 HZ ; 2000 HZ ; 4000 HZ ; 25000 HZ
NOTE: with reflesh rate increased, gray rate of dimmer will be reduced,
(that‘s means high reflesh rate, low gray rate), when it‘s <4000Hz>,CV3
is invalid, when it‘s
25000 HZ , CV1 , CV2 , CV3 are invalid, so please lower
PWM rate to increase gray rate in necessary.
FULL POWER CCT is the color temperature choose bottom, press UP/
DOWN to choose, under full power,
3200 K
;
4200 K
;
5600 K
can be
chosen, when choose COLOR, 3200 K ; 4200K ; 5600 K are not work, but
choose NORMAL.
GERÄTEEINSTELLUNGEN
MENU
SETTING
**** ****
****
OFF
OFF
SAVE
600 HZ
3200 K
2000 HZ
5600 K
NORMAL
6000 HZ
BLACK
1200 HZ
4200 K
2400 HZ
25000 HZ
RGB
DIM 1
DIM 3
UC
DIM 2
DIM 4
SEND
RESET UPLOAD
RESET
COLOR
DIMMER
DMX ERROR
PVM
FULL POWER CCT