17
ENGLISH
INSTALLATION
220~240V: 8 units may be connected in series
110~120V: 4 units may be connected in series
NOTE!
If the signal cable is over 60 m between the DMX512 controller
and fixture or beween two fixtures, then a DMX signal amplifier is
needed as well.
NOTE!
The LED MODULE can be mounted at any angle and in any position.
It is possible to further adjust the angle of the LED MODULE using
the two adjustment knobs located on the side of the fixture.
HANGING:
The LED fixture
can be mounted in a hanging
position using the supporting
bracket. The bracket should
be secured to the mounting
truss or structure using a
standard mounting clamp.
Please note that when hanging
the unit a safety cable should
also be used.
MOUNTING
POWER CONNECTIONS
2.0
2.1
2.3
