17
Attach the power cable fastener (11) to the lower tube (10), and use the screw (12)
to fasten it in the desired position. Loosen the screws (8) on the middle tube (9). Use
the 4 screws (8) to firmly screw the middle tube (9) to the lower tube (10) (see Fig.
2).
Step 3:
Loosen the screws (8) on the upper tube (7).
Use the 4 screws (8) to firmly screw the up-
per tube (7) to the middle tube (9) (see Fig.
3).
Step 4:
Pull the extension out from the
upper tube (7) and use the height
adjustment knob (6) to fix it to your
desired height.
Insert the upper tube (7) into the
casing (3) of the heater housing (1).
Tighten the adjustment knob (2) to
secure the heater housing (1) on the
tube.
Now place the power cable (13) in
the power cable fastener (11) (see
Fig. 4).
Fig. 3
Fig. 4
