20
NOTE:
-Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and
readings will flash.
-
If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep
flash until the weather reading is out of the alert range.
-The weather alert will sound again when the weather readings falls into the alert range again.
BACKLIGHT
The main unit backlight can be adjust, using the
[ HI / LO / AUTO ]
sliding switch to select the
appropriate brightness:
-Slide to the
[ HI ]
position for the brighter backlight.
-Slide to the
[ LO ]
position for the dimmer backlight.
-Slide to the
[ AUTO ]
position for the auto adjust backlight that according to environment light
level.
MAINTENANCE
BATTERY REPLACEMENT
If the low battery indicator “ ” displayed in
OUT or CH section, it indicates that the current
channel wireless or outdoor 5-in-1 sensor
battery power is low. You should replace all the
batteries in the current channel sensor at once.
CLEANING THE RAIN COLLECTOR
1. Unscrew the rain collector by turning it 30°anti-clockwise.
2. Gently remove the rain collector.
3. Clean and remove any debris or insects.
4. Install the collector when it is clean and fully dried.
N
N
“Unlock” Position
“Lock” Position
N
CLEANING HYGRO-THERMO SENSOR OF WIRELESS 5-IN-1 SENSOR
1. Remove the 2 screws at the bottom of the radiation shield.
2. Gently pull out the shield.
3. Carefully remove any dirt or insects on the sensor casing (do not
let the sensors inside get wet).
4. Clean the shield with water to remove any dirt or insects.
5. Install all the parts back when they are clean and fully dried.
PRECAUTIONS
-Keep and reading the “User manual” is highly recommended. The manufacturer and
supplier cannot accept any responsibility for any incorrect readings, export data lost and any
consequences that occur should an inaccurate reading take place.
-This product is designed for use in the home only as indication of weather conditions. This
product is not to be used for medical purposes or for public information
-Do not subject the unit to excessive force, shock, dust, temperature or humidity.
-Do not cover the ventilation holes with any items such as newspapers, curtains etc.
-Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-
free cloth.
-Do not clean the unit with abrasive or corrosive materials.
-Do not tamper with the unit’s internal components. This invalidates the warranty.
