6
How To Use
• To use, remove the folding optics cover by pulling upward from the
projection glass, then pull the entire cover free from the device by
angling the pins from the slots that are on either side of the
projection lens.
• Install two AAA batteries by opening the battery compartment door
(using your fingernail or a small flat-edged screwdriver) on the bottom
of the Explore Scientific
ReflectorSight™
(note the direction of
polarity for the batteries), then replace the battery door by pushing
down gently until you feel the door snap in place.
• Slide the device into a standard 30mm wide finderscope dovetail base
on the telescope with the parallax adjustment knobs facing rearward.
• Turn the reticle on by rotating the brightness control knob clockwise
to full brightness.
• Aim by sighting your telescope using a low-power eyepiece at the
Moon, a bright star, or a very distant object. Look through the
projection glass of the reflector sight (can be used with both eyes
open) and slowly turn (either clockwise or counter-clockwise) each of
the three rearward facing adjustment knobs until the 0.5 degree center
circle pattern is directly over the target. Repeat the process with
higher power on the telescope for greater pointing accuracy.
• Turn the brightness control knob counter-clockwise in order to see
the faintest stars while maintaining enough brightness of the
projected reticle.
• Remove the AAA batteries when storing the device for long
periods of time.
To clean, blow off dust and dirt and use a soft cloth to wipe down the
body. For the optical surfaces use standard optical cleaning tissues or
an optical cleaning cloth.
Specifications
Part no: ES-REFLECT-00
• Plastic housing
• Target dots reflect sharply at 9.8 MOA
• Reflective coating
• Water resistant
• Coated lens
• Long lasting LED
Overall dimensions:
7 in L x 1.8 in W x 5 in H (18 cm L x 4.7 cm W x 12.7 cm H)
Projection glass: 1.375 in W x 2.165 in L (35mm W x 55mm L)
Weight: 0.55 lb (249 g)
Construction: Metal, glass, and plastic parts
Includes: Reflector Sight Device; Product Badge with Serial Number;
Instructions and Warranty; ES Gift-box
