How To Connect And Operate your
LiFePO4 Smart Charger
2
1
3
LED 1 LED 2
Finished Charging
Charging
(When Connected)
Power on - Idle
LED 1 LED 2
LED 1 LED 2
LED 1 LED 2
4
Insure that the two alligator clips are separated, not
touching each other, and that they are not touching any
foreign metal objects or near flammable materials.
Connect the AC cord to your Smart charger before
connecting it to the wall socket.
Before Starting
Connecting to Battery
1
3
Make sure that you are charging the correct battery
type for this charger.
First, connect the
BLACK
alligator clip to the
Negative (–) Terminal.
Then, connect the
RED
alligator clip to the
Positive (+) Terminal
.
LED 2
will turn
RED
to indicate charging is starting.
Once you’ve followed the precautions on step 1, plug
the AC cord directly to your AC wall outlet.
LED 1
will
turn
RED
and
LED 2
will turn
Green
when connected to
the outlet.
Please read Warnings and Safety on other side of this
manual if you plan on using an extension cord.
Connecting to AC Power
Charging The Battery
2
4
The Smart Charger automatically implements the 0V
reset if necessary and the special 2-stage constant
current/constant voltage (CC/CV) charge algorithm.
The LED indicators track its progress. When
LED 2
turns
Green
your battery has finished charging.
DO NOT LEAVE UNATTENDED.
Disconnect charger
from battery first then unplug from the wall outlet.
(562) 630 - 3002
Visit us at:
ExpertPower.us
6437 Alondra Blvd
Paramount, CA 90723
For Questions
And Support
Operation Instructions
