EX9212LoRa series User Manual
EX9212LoRa Series
• Manual Version 1.1.0 • 2019-09-19
www.topsccc.com
15
5.2 Dip Switch at top of casing:
1) Setting mode: #1~#4 pins all at up position to modify LoRa settings.
2) Operation mode: only #1 at down position to run data transmission.
6. LoRa setting process
6.1 Pull power off:
6.1.1 For Ethernet to LoRa model: pull off power plug.
6.1.2 For Serial to LoRa model: pull off power plug, use a USB to RS-232 Converter to connect with
the RS-232 port. A crosslink RS-232 adaptor is necessary.
6.1.3 For USB to LoRa model: pull off USB plug from NB/PC USB host.
6.1.4 For DI/DO to LoRa model: pull off power plug.
6.2 Poke Dip Switch #1 to down position as setting mode.
6.3 Plug in the power plug or USB plug to turn power ON.
6.4 Recognize LoRa
device’s COM port
6.5 Running Setting Tool:
1
) Press “Refresh” button, select right COM port number.
2
) Press “Read” button to read existing parameters out.
3) Modify parameters as follows.
