EX-9133C-2-MTCP User Manual
EX-9133C-2-MTCP • Manual Version 1.0.1 • 201016
www.topsccc.com
Page
28
□
□
□
Remote IP address
The server IP address and socket port would be connected in Modbus
TCP Client mode for a certain serial port.
□
□
□
Remote socket port
The server socket port would be connected in Modbus TCP Client mode
for a certain serial port.
□
□
□
Interface of serial I/O
It provides an
“Auto Detect”
function and just depends on the
connected serial device’s interface as RS-422 or RS-485.
□
□
□
Baudrate
Baud Rate: 300 ~ 115200 bps
□
□
□
Parity, Data bits, Stop bit
Parity: None, Even, Odd, Space, Mark.
Data Bits: 5, 6, 7, 8.
Stop Bit: 1 or 2.
□
□
□
Force off-line time(Close the Socket)
It is for setting the off-line time period of device will be taken when
there is no date input. The parameter can be from
“1 to 255”
and the
time unit is
“Minute”
.
□
□
□
Packet Collect Time
It is for setting a packet collecting period of the device serial port’s Tx
and Rx. The parameter can be from
“0 to 999”
and the time unit is
“mSec”
.
□
□
□
Modbus type
It is for setting the ModbusTCP to
Modbus-RTU or Modbus-ASCII
or Modbus-RTU/Modbus-ASCII to
ModbusTCP
□
□
□
Interface of serial I/O
RS-485 (Half-duplex): Half-duplex RS-485 interface, RTS for
driver enable/disable
RS-422 (Full-duplex): Full-duplex RS-422 interface
