Expert EX-96 7A Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 94

Expert EX-96 7A Series Скачать руководство пользователя страница 46

EX-96XX7A User Manual

46

Memory Hole At 15M-16M

This feature will decrease your memory by 1M and allow the few old ISA cards that require this

memory to work properly on your system. Options are: Enabled and Disabled.

PCI Express Root Port Func

This item is used to configure PCI-E slot. For motherboards not equipped with PCI-E slot, such

configuration is not required. If set to Disabled, the slot and slot device will be disabled. For example,
onboard network adapter card can be disabled or enabled via PCI-E slot 1.

On-Chip Frame Buffer Size

This feature controls the amount of video memory allocated to integrated graphic card. The

system memory can be used as video memory.

DVMT Mode

Three options are available: "FIXED", "DVMT" and "Both (FIXED+DVMT)".
When set to "FIXED" mode, a fixed portion of the system memory will be allocated to GPU. Two

allocation sizes are available: 64MB and 128MB.

When set to "DVMT" Mode, the system will dynamically allocate system memory to GPU. In this

mode, up to 224MB of system memory can be allocated.

When set to "Both(FIXED+DVMT)" mode, the system will allocate a fixed memory of 64MB as

dedicated graphic memory, as well as allow a memory of 64MB to be dynamically allocated between
GPU and operating system.

DVMT/FIXED Memory Size

Refer to the previous item.

Boot Display

This feature is to select desired display device. VBIOS, LVDS1, VGA+LVDS1, LCDS2 and

VGA+LVDS2 can be selected as display device.

LCD Panel Type (LVDS Panel Type)

This feature is to select between LVDS1 and LVDS2. When selecting LVDS panel, users should

be informed of LVDS panel types supported by the motherboard. The following options are available:

LVDS1 18 800X600
LVDS1 18 1024X768
LVDS1 18*2 1280X1024
LVDS1 18*2 1440X900
LVDS1 18*2 1400X1050
LVDS1 18*2 1600X1200
LVDS1 18 1280X800

«
...
44
45
46
47
48
...
»

Содержание EX-96 7A Series































































































Отзывы:

Нет отзывов