Expert EX-96 7A Series Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 94

Expert EX-96 7A Series Скачать руководство пользователя страница 40

EX-96XX7A User Manual

40

Base Memory 639K
Extended Memory 1038336K
Total Memory 1039360K

↑↓→←

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Date

This item allows you to set a desired system date (usually current date). The date format is

<day><month><date><year>.

Day

It is a read-only and bios-defined weekday attribute ranging from Sun (Sunday) to Sat

(Saturday).

Month

It is a month attribute ranging from Jan (January) to Dec (December).

Date

It is a date attribute ranging from 1 to 31 and can be modified via numeric keys.

Year

It is a user-defined year attribute.

Time

This item allows you to set a desired system time (usually current time). The time format is
<hour><minute><second>.

Channel 0 Master / Channel 0 Slave

Channel 1 Master / Channel 1 Slave

        Press PgUp/<+> or PgDn/<-> key to select among Manual, None and Auto type. Note that the
specification of your drive device must be in compliance with the contents of Drive Table. If the
information registered in this item is not correct, your hard disk will not work properly; if your hard disk
specification is not found or does not conform to or the Driver Table, you may select Manual type to set
the specification manually.
        If you choose Manual, you will be requested to enter relevant information in the following entries.
Keyboard input is also supported. For details, you may refer to the instructive materials provided by
distributor or device manufacturer.
        If a SCSI HDD device is used, set this item to "NONE".
        If a CD-ROM drive is connected to the HDD port, set this item to "NONE"

AccessMode

Options are: Auto, Normal, Large and LBA

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precompensation cylinder

Landing Zone

Head landing zone

Halt on

The item allows you to determine when the system will stop. Options are: No Errors; All Errors; All,

But Keyboard.

No Errors

The system boot will not stop for any error.

All Errors

Whenever the BIOS detects a non-fatal error, the

system boot will stop.

All, But Keyboard The system boot will not stop for a keyboard error but

stop for all other errors as detected by BIOS. (default)

«
...
38
39
40
41
42
...
»

Содержание EX-96 7A Series































































































Отзывы:

Нет отзывов