Assembly for unloading Exploded view
Assembly completed
501
Nut: M20 x P2.5
360
Pressure ring Ø60
385
Pressure ring Ø85
243
Centering ring Ø43
502
Spindle ; M20 x P2.5
364
Pressure ring Ø64
234
Centering ring Ø34
245
Centering ring Ø45
401
Bearing cover
368
Pressure ring Ø68
238
Centering ring Ø38
101
Retainer adaptor for nut
402
Housing
372
Pressure ring Ø72
239
Centering ring Ø39
101
Retainer adaptor for nut
403
Adaptor ring Ø70
374
Pressure ring Ø74
240
Centering ring Ø40
102
Retainer adaptor for spindle
404
Adaptor ring Ø75
380
Pressure ring Ø80
241
Centering ring Ø41
102
Retainer adaptor for spindle
405
Adaptor ring Ø80
382
Pressure ring Ø82
242
Centering ring Ø42
Instructions for unloading a bearing
BEARING UNLOADING
This tool set is for the precise, quick and professional removal and replacement of wheel bearings.
The design can prevent damage to the new wheel bearing, because the press pieces enable
safe and accurate centering and alignment when changing wheel bearings.
1) Select an Adaptor Ring
(403~405) that fits against
the wheel bearing housing.
2) If there is not enough space to fit
a Adaptor Ring the bearing can
be unloaded without it.
3) Combine the Retainer Adaptor
(101) with the Bearing Cover
(401).
4) Combine the assembly from
step 3 with the selected
Adaptor Ring as shown (where
applicable).
5 ) Measure the inner diameter
of the Bearing to select the
Centering Ring (234~245).
6) Measure the outer diameter of the
Bearing to select the Presure Ring
(360~385).
7) Combine the Pressure Ring, the
Centering Ring and Spindle
adaptor (102).
8) Combine the assembly from step
7 with the Pull Spindle (502).
9) Mount the two assemblies on the
wheel bearing housing as shown
attaching the Clamping Nut
(501) on to the end of the
spindle.
10) Unload the bearing into the
housing by tightening the
assembly using a wrench,
socket and ratchet as shown.
BEARING LOADING
Assembly for loading Exploded view
Assembly completed
501
Nut: M20 x P2.5
360
Pressure ring Ø60
385
Pressure ring Ø85
243
Centering ring Ø43
502
Spindle ; M20 x P2.5
364
Pressure ring Ø64
234
Centering ring Ø34
245
Centering ring Ø45
401
Bearing cover
368
Pressure ring Ø68
238
Centering ring Ø38
101
Retainer adaptor for nut
402
Housing
372
Pressure ring Ø72
239
Centering ring Ø39
101
Retainer adaptor for nut
403
Adaptor ring Ø70
374
Pressure ring Ø74
240
Centering ring Ø40
102
Retainer adaptor for spindle
404
Adaptor ring Ø75
380
Pressure ring Ø80
241
Centering ring Ø41
102
Retainer adaptor for spindle
405
Adaptor ring Ø80
382
Pressure ring Ø82
242
Centering ring Ø42
˙ Suitable for VW, Audi, Seat, Opel, BMW .…. etc.
˙ For wheel bearing diameter 60 mm - 85mm.
˙ This tool set is for the precise, quick and professional removal and replacement of wheel bearings.
˙ The design can prevent damage to the new wheel bearing, because the press pieces enable safe and
accurate centering and alignment when changing wheel bearings.
Instructions for loading a bearing
1) Measure the inner diameter
of the Bearing to select the
Centering Ring (234~245).
2) Combine the Adaptor
(101) with the selected
Centering Ring (234~245).
3) Measure the outer
diameter of the Bearing
to select the Presure Ring
(360~385).
4) Combine the selected Presure
Ring with the adaptor and
centering ring assembly from
step2.
5) Combine the three piece
assembly with the Bearing.
6) Take the Bearing cover (401)
and combine with Retainer
Adaptor (102).
7) Combine the Pull Spindle (502), Retainer Adaptor (102) & Bearing Cover (401).
8) Mount the two assemblies on the wheel bearing housing as shown attaching
the Clamping Nut (501) on to the end of the spindle.
9) Load the bearing into the housing by tightening the assembly using a wrench, socket and
ratchet as shown.
EN
