Expert Sleepers CVM-8, Руководство пользователя

Страница: 8 / 17

To the right of the MIDI port menus are these buttons:
The 'Request Firmware Version' button sends and receives short SysEx messages to report the
CVM-8's firmware version.
'Query DIP Switches' asks the module to report the position of its DIP switches.
'Resynchronise' attempts to re-establish communication with the module and refresh the tool's view
of the module's state. You might use this for example if the module has been turn off and back on.
'Enter bootloader mode' is used to update the firmware – see below.
Below the buttons are three text boxes.
The left box is a log of messages reported by the tool. The centre box shows the last SysEx message
sent by the tool. The right box shows the last SysEx message received by the tool, and in the case of
the 'Message' SysEx message, the actual message as plain text.
Raw Inputs
Below the log messages is the raw inputs area.
Untick the check box if you don't want this area visible.
Three values are shown for each input. The top row shows the raw ADC code coming from the
hardware. The centre row shows the input as a voltage. The bottom row shows the processed ADC
codes that are used to generate MIDI and I2C messages, which have been stabilised to avoid
excessive messages due to noise. A green value shows that the module considers the value stable.
Statistics
Next to the raw inputs is the 'stats' section.
This displays the number of bytes received and transmitted on the two MIDI ports, and the number
of bytes transmitted over I2C, in the last second. It also shows the total number of ADC conversions
performed per second.
Page 8