manualshive.com logo in svg

Expert Sleepers CVM-8, Руководство пользователя

Поделиться
Скачать
Expert Sleepers CVM-8 Скачать руководство пользователя страница 7

the words 'SELECT BUS' on the PCB).

When changing the jumper position please do so with the module powered off.

DIP Switches

The module has a set of four switches on the PCB, marked 'SW1'.

These are used to choose the configuration to load at power on. Please see the section on saving and 
loading configurations, below.
If all four switches are set to the 'on' position, this forces the module to start in bootloader mode 
(see the section on firmware updates, below). Usually this is not required, as the configuration tool 
can reboot the module into bootloader mode, but if the module is not cooperating this provides a 
means of forcing the issue.

Configuration Tool

A GUI tool is provided to configure the CVM-8. Please find the version appropriate to your 
firmware version on the 

firmware download page

8

.

A standalone version is provided for macOS and Windows, as well as a platform-independent 
browser-based version. This last uses the Web MIDI API, which at the time of writing will work 
only in browsers based on Google's Chromium (which includes Chrome).
All is well if the tool shows 

Web MIDI status: OK

If it shows 

Web MIDI status: No MIDI support in your browser 

then you need to use a different browser.

In general, changes made in the tool are reflected immediately in the hardware. However nothing is 
saved automatically – remember to save the configuration to flash memory if you want to keep it.

Tool Setup

The tool needs a MIDI connection to the CVM-8. Either MIDI port 1 or 2 can be used. You need to 
connect both a MIDI in and a MIDI out.
At the top of the tool are these controls:

Use the drop-down menus to select the MIDI ports on your computer that you've connected to the 
module.

8 https://expert-sleepers.co.uk/cvm8firmwareupdates.html

Page 7

Содержание CVM-8


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды