Expert Electronics SunSDR2 DX, Руководство пользователя

Страница: 27 / 107

27
SunSDR2 DX User Manual
© 2020 Expert Electronics
ExpertSDR2 SOFTWARE DESCRIPTION
- Volume slider. This setting is stored per band, it affects the LF
output on the transceiver's front panel and PC's sound card output. Speaker icon has the mute
function.
- Mon volume slider. Press the MON button to enable the
monitoring. This function allows you to listen to the generated signal and control its quality.
Note:
·
An excessive monitoring volume may lead to the positive acoustic connection between the
microphone and headphones and as a result to the self-triggering of the audio path.
·
In CW mode, transceiver always generates monitoring signal, even if the MON button is not
pressed, you use it while working on the air. BUT, if the MON button is not pressed, TX signal
won't be displayed on the panorama. To display your TX CW signal press the MON button.
- Even if the MON button is switched off, it is possible to
enable the following functions from the drop-down menu:
Always enabled MON in SSB f or VAC: if the audio record is transmitted in SSB via VAC,
the self-control will be enabled.
Always enabled MON f or Voice Recorder: if the voice recorder is transmitting the audio
record, the self-control will be enabled.
Save drive by band and mode: If you disable Save drive by band and mode, then Drive
level will be the same for both RX1 and RX2.
If you enable Save drive by band and mode, then Drive level will be independent for RX1
and RX2, considering they are on different bands. If they are on the same band, then Drive level
will be the same for both RXs. Tone level is stored only for frequency bands.