background image

 

 

 

The  purpose  of  the  immobilizer  Omega  IMMO  is  the  identification  of  the 

driver.  The  driver  is  identified,  when  the  person with  ID  card  comes  inside  the 
communication area. If the person has no ID card, the immobilizer regards, the 
vehicle  is  under  unauthorized  use  and  transfers  the  signal  for  engine 
immobilization. 

 

 

THE SET 

a)  system unit; 
b)  two ID cards; 
c)  user manual; 
 

 

 
THE SYSTEM UNIT 

The system unit supports 2-way radio communication with ID card, decodes 

received  information  and  converts  it  to  the  control  signals.  If  the  driver 
identification fails, the system unit transfers an immobilization signal intended 
for  an  external  immobilization  equipment.  A  car  alarm  system,  GSM/GPS 
system, other equipment can be used as external immobilization equipment.. 

 
USING THE SYSTEM 

 
INNER IMMOBILIZER 

With the inner immobilizer will ON each time the ignition is turned OFF and 

the  engine  immobilization  delay  time  (default  time  is  set  at  20  seconds)  is 
elapsed.  The  Omega  IMMO  indicates  the  engine  immobilization  by  a  long 
system's  LED  flashes.  Engine  immobilization  should  be  cancelled  by  ID  card. 
Then the system's LED will go OFF. 

 

 

 

Switch 

Diode LED 

Содержание Omega IMMO









Отзывы: