background image

Experiment X Germany GmbH 

Perleberger Straße 42d

 

D-10559 Berlin 

Germany

 

18

 

 

Igloo 

lifetime  is  limited  and  depends  on  the  number  of  measurements  or  battery  recharges 

made. The manufacturer expects the lifetime of 2 years during normal use. 

Igloo is anticipated to provide the 

expected performance 

for up to 500 battery charging cycles. 

However, in order to optimize this number, the device should not be stored continuously without 
being used for extended periods of time.  

 

If stored for a long time, the Igloo should be fully charged, fully discharged and fully charged again 
at  least  once  every  90  days.  Otherwise,  the  functionality  of  the  battery  is  not  guaranteed. 
However, even in this scenario, no safety risks are anticipated.

 

The  manufacturer  guarantees  the  correct  operation  of  the  device  in  compliance  with  its 
operating instructions and recommendations. The expiration of the warranty does not prohibit 
the use of Igloo, the manufacturer is not responsible for the results obtained after the device 
expiration. 

More information is available at 

https://support.Igloo.today/dxcare

 

For additional information and support please contact: 

[email protected]

 

Igloo is powered by a Li-Ion 2000 mAh battery,  please follow the internal regulations of your 
country for the proper disposal of the device.

 

If  returning  the  device  to  the  manufacturer,  make  sure  to  disinfect  it  first.  The  appropriate 
disinfection procedure can be found on the website. 

The name and address of the

 device and software manufacturer:

 

Experiment X Germany Gmbh (c/o TRA Robotics Gmbh) 

Perleberger Straße 42d

 

D-10559 Berlin / Germany 

**

The name and address of the Legal Manufacturer:

 

 

Copyright Information 

All trademarks are registered. 
Contents of this document can be changed by Experiment X without notice. 
Reproduction or republication of this document is prohibited without written concern of 
Experiment X. 
Igloo Dx Care Instructions for Use Document Version 

1.0.1.

 

Содержание Igloo



















Отзывы: