Experia 48 00 81, Руководство по эксплуатации продукта

Страница: 5 / 9

Operating Instructions
Switching on the Touch Wall
1. Plug in and switch on at the mains supply. The Touch Wall will now self-check.
2. Once the self-check has occurred the Touch Wall goes into sleep mode.
3. Press the control panel on-off button to wake up the Touch Wall which will now boot-up.
4. Once the Touch Wall displays the mode Trails it is ready for use.
5. Touch the screen to illuminate the LEDs in the various modes available.
Touchwall modes of operation
The modes of operation described below are variably effected by adjusting the speed and fade
settings. If a mode selected isn’t working well for the user then make some changes and try again.
All modes have a different sound reward which is adjustable via the volume control.
The LED colour can be user selected by simply touching the Colour Wheel and watching the circle of
lit LEDs in the middle of the touch screen area until the desired colour has been achieved.
Some of the modes can behave differently if the sensitivity is turned up too much, turn it down a little
to correct this.
Trail: touch the screen and wipe around to see a trail of LEDs.
Radar: touching the screen produces a circular radar blip.
Squares, Diamond, Plus, Cross and Triangle: produce shapes of different sizes upon screen contact.
Number: display numbers 0 to 9 incrementing with every touch.
Splat: a circle appears and disappears from the circle centre out.
Ripple: full screen of LEDs are lit which when touched sends a ripple of white light.
Snake: LEDs snake across the screen and when they meet a contact they explode.