11
Manuel d’utilisation
MOOVE PAR 908 IP
Ch
oo
se
P
at
te
rn
Static Color
Macro Color
Show Mode
Sound model
User Colors
User Run
RGBW (0-255) Strobe( 0-255)
001-016
AUTO / FADE / SNAP / STRO(RGB)
Sound ( 1-3) outdoor no the function
RGBW ( 000-255) Bank: 1/16 1. Static
Color
2. Auto Mode
Us
er
se
tt
in
g
Channel
DMX512 Address
Slave Mode
Wifi Mode
5CH / 9CH
001-512
Sy
st
em
se
tt
in
g
White balance
Show Battery
Display sleep
Dimmer option
Auto power
IRC setting
RF 2.4 setting
RF 2.4 FREQ
Power Setting
Emergency Lamp
DMX Hold
RGBW ( 0-255)
Yes / No?
Open/5Sec/10Sec/15Sec
Normal - Dimmer 1-Dimmer 2-Dimmer 3
Off / On
Yes/No
Yes/No
1CH-7CH
High / Medium / Low
Yes / No
Yes / No
In
fo
rm
ati
on
Led Temp:
Work Hours:
Software Version
Hardware version
Logo
30
℃
-70
℃
000H-999H
V.1.06
Set DMX Address Code
1. Press
"Menu"
to "Set DMX Address",and press
"ENTER"
keys to enter into
2. Show "Set DMX Address DMX Address:
001
",Press the "
UP and DOWN
"
keys to amended
3. Press
"ENTER"
keys to save and Exit,Press the"
MENU"
Keys does not save and Exit.
4.Turn on operation: when in charging or turn off, press "MENU" for more than 4s,then screen will d
isplay clients' logo and model of products,
there are "MENU","UP"."DOWN" for your selection to choose the function,press" ENTER" to confir
med and enter the next menu,press "MENU" could back to the last menu.
When turn on , press" MENU" for more than 4s,the screen will display " Power Off",and will close LE
D output by then.
If charger connect with electricity, the screen will display charging icon and
percentage of battery power. Or will be turn off directly, and the battery
powered will be totally cut off.
5. When using Master-Slave model, apart from the first one as Master without setting,the others
need to set as Slave.
6. When using DMX512 controller, all the lights need to set as DMX model.
