10
User manual
1.4 INSTALLATION
The unit should be mounted by its screws holes on the bracket. Always ensure that th eunit is frimly fixed
to avoid vibration and slipping while operating. The structure to which you are attaching the unit should
be able to support 10 times the weight of the unit. Also always use a safety cable than can hold 12 times
the weight of the unti when installing the fixture. The quipment must be fixed by professionals
.
The product can be mounted in an upright or sitting position using the supporting brackets.
NOTE:
The product can be mounted at any angle and in any position. It is possible to further adjust the angle of
the product using the two adjustment knobs located on the side of the fixture.
This product is designed for indoor/outdoor use.
2. TECHNICAL SPECIFICATIONS
9 x 8 W LED PAR RGBW FC IP wireless
* Battery or classic use
* SONY battery : 7h wireless (full) -15h wireless (1color)
* 0-100% refill : 4h (8h when using the PAR)
* Light Source : 9 x 8 W LED RGBW 4 in 1
* 11 600 LUX@1M
* OLED display
* Noise : Quiet (0dBA)
* DMX modes : 5/9
* Control modes : DMX, Wireless DMX, Master-Slave, Auto, IR remote, IOS and Android apps
* Beam angle : 30
°
* Voltage : AC100-240V, 50/60Hz
* Power consumption : 45W
* Dimensions: 245
×
305
×
135 mm
•
Net weight
5Kg
3.
MENU
[MENU]
menu selection or return to previous menu.
[UP]
press [UP] through the menu list to increase/change the value of the current function.
[DOWN]
press [DOWN] through the menu list to decrease/change the value of the current function.
[ENTER]
confirm & quit out current function setting.
MOOVE PAR 908 IP
