EXP Computer ThinConnect4 Скачать руководство пользователя страница 23

Страница: 23 / 152

ThinConnect4

<13>

2.6 Windows 95/98 Settings for LAN Connection

This section applies to all PCs connect to ThinConnect4.

In order to connect to the Internet successfully, all PCs connected to the ThinConnect4 have
to have the TCP/IP protocol installed and set properly.

2.6.1 Verify the TCP/IP protocol installation

To verify if TCP/IP protocol is installed properly, please proceed to the following steps.

Double-click on “My Computer” -> “Control Panel” -> “Network”

In Network window, check if TCP/IP is shown and properly set up.

(The following display shows the TCP/IP protocol is already installed.)

If TCP/IP protocol has properly installed, please proceed to 2.6.3 TCP/IP
Settings (Page 16).

If there is NO TCP/IP protocol show in the “Network” window show above, go to the next
page to install TCP/IP protocol.

Содержание ThinConnect4

























































































































































Результаты поиска

Содержание ThinConnect4

Отзывы:

EXP Computer ThinConnect4, Руководство пользователя, Страница: 23 / 152

Результаты поиска

Содержание ThinConnect4

Отзывы: