EXP Computer ThinConnect4 Скачать руководство пользователя страница 141

Страница: 141 / 152

ThinConnect4

<131>

9.2 Connection Types

This section describes different kinds of public telephone network connection.

•

Auto connection

When a user starts an Internet application such as Web browser, E-mail etc, the
ThinConnect4 will connect automatically to ISP.

The dial-up network screen will not be shown. ThinConnect4 will use its configuration
based on the ISP information you have provided to connect to the Internet.

Make sure to check the “Enable Auto-Connection” function box.

See 4.4.1 Automatic Connection (Page 68).

Note: PING and NetBIOS program cannot initiate an Auto- Connection

•

Manual connection

Highlight a serial port that you wish to connect from the list by clicking on it.
Click the “Connect” button on serial port 1 (or 2).

•

Leased line connection

Switch on TA, and then switch on ThinConnect4.
After powering on ThinConnect4, it will connect automatically.

Please refer to 9.3.1 PSTN and ISDN for Disconnecting (Next page).

End of 9.2 Connection Types

Содержание ThinConnect4

























































































































































Результаты поиска

Содержание ThinConnect4

Отзывы:

EXP Computer ThinConnect4, Руководство пользователя, Страница: 141 / 152

Результаты поиска

Содержание ThinConnect4

Отзывы: