background image

INTRODUCTION

The CD ReWriter is a portable CD-ROM drive, which consists of a low-
power CD rewritable drive, a small 26 pin universal connector, a cable for
Parallel port (printer port),. It is compatible with either computer’s Parallel
Port
 or PC CARD (PCMCIA) 2.1 Type II or I slot.  The CD Rewriter can write
to CD-R (write-once) or CD-RW (rewritable) disk and read other variety of
CD formats. The drive required an external power supply adapter (included).
CD ReWriter dual connection gives user flexibility to add more storage
space or transfer data between your notebook and/or your desktop
computer.

SYSTEM REQUIREMENTS

 Notebook or desktop computer with Pentium 133 Mhz or higher

 32 MB RAM

 75 MB free HD space

 A Parallel port (EPP or bi-directional) or If using the PC Card interface,

the computer should have at least one PC Card (PCMCIA) 2.1 slot.

 Windows 95/98, Windows NT 4.0

§

 Suitable for the following disk standard: CD R/RW, CD- DA, CD-ROM,

CD-I, C—ROM XA, CD-Bridge, Photo CD, Video CD, CD Extra

§

 Power source: 

AC Adapter

Input: 120-240 VAC 50-60 Hz 0.4 A.

Output: 12 VDC 1000 mA.

§

 CD-RW and CD-R disc and application software included.

PACKAGE CONTENTS

1. Parallel Port interface cable

Standard 25 pin Parallel port connector and 26 pin small connector.

2. CD drive assembly

CD drive with the power indicator, a DC input jack

3.

 

AC Adapter

Input: 100-240 VAC, 50-60 Hz. 0.4A.

     Output: +12 VDC/1000mA.

4.

 

Blank CD-RW and CD-R disk

5. PC Card

3

1

4

2

5

Содержание CRW-740




















Отзывы: