EXP Computer CD-940E, Руководство по установке, Страница: 9 / 30

- 4 -
HARDWARE INSTALLATION
Before you begin, make sure you turn OFF all power to your system
before connecting the PCMCIA CD-ROM to your computer.
1. Connect the PCMCIA interface card to the CD-ROM drive. Press
firmly until the CD-ROM connector is seated, and tighten the two
screws on the cable connector.
2. Place the CD-ROM drive in the horizontal position, for the CD-
ROM is designed to operate only in the flat position. Operating the
CD-ROM drive in any abnormal position is prohibited.
3. Consult your computer’s documentation and locate the PCMCIA
slot.
4. Align the PCMCIA interface card with the arrow sign pointing to
the computer’s slot. (Please note that the card is keyed to guide
proper orientation.)
5. Slowly insert the PCMCIA interface card into the slot and press
firmly until the connector is seated.
6. You are now ready to install the PCMCIA CD-ROM device driver.
Please follow the Software Installation procedures.
You should connect the PCMCICA interface card to CD-ROM drive first before
inserting the PCMCIA interface card into your computer. DO NOT
connect/disconnect the CD-ROM PCMCIA interface card to/from the PCMCIA
interface card when the system is in power-on state.
CAUTION