EXP Computer CD-940E, Руководство по установке, Страница: 14 / 30

- 9 -
When the following dialog box appear, select PCMCIA CD-ROM (I) card
and click on OK bottom.
Follow the on-screen instruction to continue. After finishing, remember
to shutdown Windows and restart your computer if you are using the
PCMCIA CD-ROM to install Windows 95.
Note that it is not necessary to connect the PCMCIA CD-ROM every
time you reboot your computer, plug it just when you need to use it.
USING PCMCIA CD-ROM TO INSTALL WINDOWS 95
If you are about to upgrade your operating system from DOS/Windows
to Windows 95 using the PCMCIA CD-ROM, the PCMCIA CD-ROM
DOS device driver as described in the “Software Installation for
DOS/Windows” section should be properly installed first before
proceeding further. Then, perform the following steps to install Windows
95.
1. Start Windows 3.1.
2. Insert the Windows 95 CD into the PCMCIA CD-ROM.
3. Run File Manager and select the PCMCIA CD-ROM drive.
4. Find and double-click the file setup.exe.
5. Follow the on-screen instructions to complete the installation of
Windows 95.