26
MANUGENETOP6xx
Operating Instructions
VER 1.03
8 Cleaning Faceplates
The equipment must be cleaned only with a soft cloth and neutral soap product. Do not use solvents.
Cleaning Faceplates / Getting Started
9 Getting Started
eTOP Series 600 HMI products must be programmed with the software JMobile Studio. JMobile Stu-
dio is a software tool that must be properly installed on a computer running Microsoft Windows.
There are two options to transfer a JMobile application project to a HMI device:
Ethernet
Connect the HMI device to the computer with an Ethernet network connection. From
JMobile Studio choose the command Run/Download to target. You may have to
ensure that the proper firewall policy has been configured in the computer to allow
JMobile Studio to access the network.
USB or SD
Create an Update Package using JMobile Studio and copy it to a USB Flash drive or
to an SD memory card.
