4
English
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
4.
When first setting up the computer use the following
procedure
(as to safeguard the computer during shipping, the
battery will be locked to not power the system until first
connected to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the rear
of the computer, then plug the AC power cord into an outlet,
and connect the AC power cord to the AC/DC adapter. The
battery will now be unlocked.
5. Use one hand to raise the lid to a comfortable viewing angle (do
not exceed 130 degrees); use the other hand (as illustrated in
) to support the base of the computer (
Note:
Never
lift
the computer by the lid).
6. Press the power button to turn the computer “on”.
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to
Microsoft
Windows 10
.
Intel® Optane™/RAID Support
Note that your system can be set up as a RAID OR to sup-
port Intel® Optane™, but it cannot be set to support both
systems. You need to setup
Intel
®
Optane
™ or
RAID
before installing your
Windows 10
operating system (see
Figure 1
Opening the Lid/
Computer with AC/
DC Adapter
Plugged-In
Shut Down
Note that you should always shut your
computer down by choosing the
Shut
down
command in
Windows
(see be-
low). This will help prevent hard disk or
system problems.
1. Click the Start Menu icon
.
2. Click the
Power
item
.
3. Choose
Shut down
from the menu.
130
°
PC 5070 DDDFDN book v2.book Page 4 Thursday, July 30, 2020 4:29 PM
