Exodraft GSV 009, Инструкция по установке и эксплуатации

Страница: 9 / 16

4. Electrical installation
4.1 Electrical requirements
Power requirements are dependent on the fan size and can be found on page 6.
DANGER
Turn off electrical power before servicing. Contact with live electric components can cause shock
or death.
NOTICE
If any of the original wire supplied with the system must be replaced, use similar wire of the same
temperature rating. Otherwise, insulation may melt or degrade, exposing bare wire.
4.2 Wiring diagram
The connection diagram below shows how the exodraft fan is connected to the fan speed control and the power source
(see Fig. 4).
Use a 2-conductor wire of min. 14 AWG with ground.
Fig. 4
To fan
To power
Black
Black
White
Whit
e
Red
Green
Disc
onnec
t swit
ch
9
3001361 GSV009-016 Grease fan 20210824 - international