background image

3. 

Mechanical installation

3.1         General

Warning

Installation, service and/or operation of the CHRP-S waste heat exchanger that does not 

comply with the instructions from the manufacturer, can cause personal injuries or damage of 

material.

The installation of the CHRP-S waste heat exchanger must comply with this manual and the local regulations. Only 

qualified professionals may perform the installation.

The respective national laws regarding distance to flammable materials are to be respected.

3.2         Positioning and mounting

Important! The heat exchanger must always be built in vertical for operation complying with the regulations! 

Incorrect mounting limits the heat capacity and operation of the heat exchanger.

  

 

This is the only allowed mounting position.

Exit - 

Waste heat / 

service opening

Exit - 

Waste heat / 

service opening

Entry - Waste heat

A

C

B

Hanging with threaded rods (B) on angle bars (A) over and under the appliance. We recommend to mount the angle 

bars with self-tapping screws (C) at the housing (only by insulated articles). The lengths of the screws are to be picked in 

a way that does not damage the inner housing.

Mount the CHRP-S appliance in a way that makes the compact-plate heat exchanger easy accessible and 

always removable.

3002691 CHRP-S UK

Mechanical Installation • 

Содержание CHRP-S





















Отзывы: