Operation
g027299
Figure 18
Narrow spray
1.
Overlap-narrow—1.3 ft (.4 m)
2.
Effective spray area—4 ft (1.2 m)
B.
When finished spraying, turn off the spray control lever and the spray pump switch.
Note:
The spray pump switch can be left on for tank agitation.
•
To use the spray wand:
A.
Remove the wand from the holder on the right side of the machine.
B.
Turn the spray wand flow valve on.
C.
Firmly grip and hold the spray wand. Point it in the direction to be sprayed.
Note:
Wand may kickback; make sure to hold the wand securely.
WARNING
Spray wand traps liquids under high pressure, even when engine is off. High pressure spray
discharge could cause serious injury or death.
•
Keep clear of nozzle and Do Not direct spray or stream at people, pets, or non-work
area property.
•
Do Not direct spray on or near electrical power components or source.
•
Do Not repair spray wand, hoses, seals, nozzle, or other wand components; replace them.
•
Do Not attach hoses or other components to the end of the spray wand nozzle.
•
Do Not attempt to disconnect the spray wand from the unit while the system is
pressurized.
•
Do Not use spray wand if trigger lock is damaged or missing.
•
Do Not keep spray wand in locked-open position when job is complete.
D.
Adjust the spray wand flow using the wand flow control.
E.
Squeeze the trigger to the spray wand handle to begin spraying; lock the trigger in place if desired.
6.
When finished spraying:
•
From the front spray nozzles:
31
Содержание Z Turf Equipment Z-SPRAY
