Exmark STARIS E Series, Руководство оператора

Страница: 35 / 52

Maintenance
3. Clean area around hydraulic reservoir cap and
remove cap. Oil level should be to in the cross
hatch on the dipstick when cold. If not, add
oil. Use Exmark Premium Hydro Oil. Replace
hydraulic reservoir cap and tighten until snug. Do
Not overtighten.
4. Wipe the dipstick clean and re-insert the cap back
into the hydro. Lightly tighten the cap.
5. Remove the cap again and check the level of the
oil on the dipstick. See Figure 23 for oil levels.
g008606
Figure 23
1. Full 2. Add
Note:
The oil level on the dipstick will be
incorrect if the oil is checked when the unit is hot.
6. If the dipstick oil level does not register on the
dipstick, add Exmark Premium Hydro Oil.
Do
Not overfill.
7. Replace hydraulic reservoir cap and tighten until
snug.
Do Not overtighten.
8. Lower the thigh pad.
Check Tire Pressures
Service Interval: Every 50 hours
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Check tire pressure in drive tires.
3. Inflate drive tires to 12–14 psi (83–97 kPa).
4. Semi-pneumatic caster tires do not need to be
inflated.
Check Condition Of Belts
Service Interval: Every 50 hours
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Look on the top side of the cutting deck to check
the mower blade drive belt condition.
3. Look under the engine deck to check the pump
drive belt condition.
4. Check all idler arms to be sure they pivot freely.
Lubricate Grease Fittings
Note:
See chart for service intervals.
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Lubricate fittings with NLGI grade #2
multi-purpose gun grease.
Refer to the following chart for fitting locations
and lubrication schedule.
Lubrication Chart
Fitting
Locations
Initial
Pumps
Number of
Places
Service
Interval
1. Deck Belt
Idler Pivot 1 1 Yearly
Check Spark Plugs
Service Interval: Every 160 hours
Remove spark plugs, check condition and reset gaps,
or replace with new plugs. See Engine Owner's
Manual.
Change Fuel Filter
Service Interval: As required
A fuel filter is installed in the fuel line between the
fuel tank and the engine. Replace when necessary.
35