Exmark Phazer Скачать руководство пользователя

Страница: 19 / 48

Operator must be in seat

when PTO is engaged

brake is disengaged

, or

motion

control

levers are moved in

or engine will stop.

Engine will stop if either the left, the right, or both levers are

moved from neutral lock

position while brake is engaged

2.5 OPERATOR CONTROLS

2.5.1

Steering and Motion Control:

Separate levers, on each side of the console, control speed and direction of travel of
the respective drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

Moving motion control levers outward

(in slots)

locks the drive system in neutral.

Motion control levers are adjustable to two heights.

2.5.2 PTO

Switch: Engages electric clutch (to drive belt) which engages mower blades.

2.5.3 Parking Brake Lever: Engages parking brake.

2.5.4 Deck Height Adjustment Lever: Sets cutting height to desired position.

2.5.5 Deck

Lift

: Foot pedal that assists in raising

the deck.

2.6

SEAT

2.6.1 Type: Standard seat: high back, foam padded

2.6.2 Mounting: Hinged to tilt up for access to battery and other components. Held in tilted

position with lanyard. Adjustable fore and aft.

2.6.3 Armrests:

Standard: foam padded flip-up armrests.

2.6.4 Seat Safety Switch: Incorporated into the Safety Interlock System.

Time delay seat switch eliminates rough ground cut-outs.

2.7 HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1 Hydrostatic Drive: Two Hydro Gear ZT2800 Integrated drive systems.
2.7.2 Hydraulic Oil: Use Mobil 1 15W-50 Synthetic Motor Oil.

2.7.3 Speeds: All units:

0 – 7.2 mph (11.6 km/hr) forward.

0 – 4.0 mph (6.4 km/hr) reverse.

2.7.4 Drive wheel releases allow machine to be moved when the engine is not running and

brake is off (left and right sides of engine).

2.8 TIRES AND WHEELS

2.8.1 Tires:

Size Qty

Tread Ply Inflation

Drive Tires
34” Unit
44” Unit

18 x 7-8

18 x 9.5-8

“Turf Mate”

13 psi (90 kPa)

Front Caster Tires

11 x 4.00-5

Smooth

Semi pneumatic

2.9 CUTTING DECK

2.9.1 Cutting

Width:

34” deck

44” deck

34.5 in.

(87.6 cm)

44.0 in.

(111.8 cm)

2.9.2 Discharge: Side (Optional Mulch and/or Bag)

2.9.3 Blade Size:

34” deck

44” deck

(3 ea.)

17.5 in.

(44.5 cm)

15.25 in.

(38.7cm)

2.9.4 Blade Spindles: solid steel spindles with 1” (2.54 cm) I.D. bearings.

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

Содержание Phazer

















































Результаты поиска

Содержание Phazer

Отзывы:

Похожие инструкции для Phazer

Бренды по названию

Популярные бренды

Exmark Phazer, Руководство оператора

Результаты поиска

Содержание Phazer

Отзывы:

Похожие инструкции для Phazer

Бренды по названию

Популярные бренды