Exmark METRO 346, Руководство оператора

Страница: 39 / 48

Maintenance
2. Remove cooling shrouds from engine and clean
cooling fins. Also clean dust, dirt, and oil from
external surfaces of engine which can cause
improper cooling.
3. Make sure cooling shrouds are properly reinstalled.
Operating the engine without cooling shrouds will
cause engine damage due to overheating.
Clean Debris From Machine
Service Interval: Before each use or daily
1. Stop engine, wait for all moving parts to stop, and
remove key. Engage parking brake.
2. Clean off any oil, debris, or grass build-up on the
machine and cutting deck, especially under deck
belt shields, around the fuel tank, around engine
and exhaust area.
Important:
You can wash the machine with
mild detergent and water. Do not pressure
wash the machine. Avoid excessive use of
water, especially near the control panel,
around the engine, hydraulic pumps, and
motors.
Clean Grass Build-Up Under
Deck
Service Interval: Before each use or daily
1. Disengage PTO.
2. Stop engine and wait for all moving parts to stop.
Engage parking brake. Remove key or spark plug
wire(s).
3. Raise deck and support unit using jack stands or
equivalent support.
4. Clean out any grass build-up from underside of
deck and in discharge chute.
Waste Disposal
Motor Oil Disposal
Engine oil is a pollutant to the environment. Dispose
of used oil at a certified recycling center or according
to your state and local regulations.
39