Exmark METRO 346, Руководство оператора

Страница: 24 / 48

Maintenance
g006799
Figure 8
1. Spring disc washer (cone towards bolt head)
2. Blade bolt torque to 75-80 ft-lb (102-109 N-m).
Replacing the Discharge
Deflector
Service Interval: As required
DANGER
An uncovered discharge opening could allow the
lawn mower to throw objects in the operator’s or
bystander’s direction and result in serious injury.
Also, contact with the blade could occur.
Never operate the lawn mower unless you install
a mulch plate, discharge deflector, or grass
collection system.
1. To remove a damaged or worn discharge deflector,
lift the leg of the spring with the loop out of the
notch in the discharge deflector and slide the
rod out of the discharge deflector brackets, and
discharge deflector.
2. To install new discharge deflector, orient the
spring on the rod as shown in Figure 9. Slide the
rod through the front discharge deflector bracket,
discharge deflector, and rear deflector bracket.
g010195
Figure 9
1. Rod 4. Mower deck
2. Spring 5. Discharge deflector
bracket
3. Discharge deflector 6. Assembled view
3. Hook the bent end of the rod around the front
discharge deflector bracket to retain it from
sliding out. Place the leg of the spring with the
loop in the notch in the discharge deflector to
hold the discharge deflector in the down position
(see Figure 9).
Important:
The discharge deflector must be
spring loaded in the down position. Lift the
deflector up to test that it snaps to the full
down position.
Check Spark Plugs
Service Interval: Every 160 hours
Remove spark plugs, check condition and reset gaps,
or replace with new plugs. See Engine Owner's
Manual.
24