Exmark M216KA, M216KASP Скачать руководство пользователя

Страница: 29 / 32

Problem

Corrective Action

Possible Causes

Lawn mower or engine vibrates
excessively

1. The blade is bent or is out of

balance.

2. The blade mounting bolt is

loose.

3. The underside of the lawn

mower deck contains clippings
and debris.

4. The engine mounting bolts are

loose.

1. Balance the blade. If the blade

is bent, replace it.

2. Tighten the blade mounting

bolt.

3. Clean the underside of the lawn

mower deck.

4. Tighten the engine mounting

bolts.

Uneven cutting pattern

1. All four wheels are not at the

same height.

2. The blade is dull.

3. You are mowing in the same

pattern repeatedly.

4. The underside of the lawn

mower deck contains clippings
and debris.

1. Place all four wheels at the

same height.

2. Sharpen and balance the

blade.

3. Change the mowing pattern.

4. Clean the underside of the lawn

mower deck.

Discharge chute plugs

1. The throttle lever is not in the

Fast position.

2. The cutting height is too low.

3. You are mowing too fast.

4. The grass is wet.

5. The underside of the lawn

mower deck contains clippings
and debris.

1. Move the throttle lever to the

Fast position.

2. Raise the cutting height.

3. Slow down.

4. Allow the grass to dry before

mowing.

5. Clean the underside of the lawn

mower deck.

Lawn mower does not self-propel
(Self-propel model only)

1. The self-propel drive cable is

out of adjustment or is
damaged.

2. There is debris under the belt

cover.

1. Adjust the self-propel drive

cable. Replace the cable if
necessary.

2. Clean the debris from under

the belt cover.

Содержание M216KA, M216KASP

































Результаты поиска

Содержание M216KA, M216KASP

Отзывы:

Похожие инструкции для M216KA, M216KASP

Бренды по названию

Популярные бренды

Exmark M216KA, M216KASP, Руководство оператора

Результаты поиска

Содержание M216KA, M216KASP

Отзывы:

Похожие инструкции для M216KA, M216KASP

Бренды по названию

Популярные бренды