Exmark Lazer Z HP 465 страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 48

background image

Maintenance

Maintenance

Note:

Determine the left and right sides of the machine from the normal operating position.

WARNING

While maintenance or adjustments are being
made, someone could start the engine.
Accidental starting of the engine could
seriously injure you or other bystanders.

Remove the key from the ignition switch,
engage parking brake, and pull the wire(s)
off the spark plug(s) before you do any
maintenance. Also push the wire(s) aside
so it does not accidentally contact the spark
plug(s).

WARNING

The engine can become very hot. Touching
a hot engine can cause severe burns.

Allow the engine to cool completely before
service or making repairs around the engine
area.

Recommended Maintenance Schedule(s)

Maintenance Service

Interval

Maintenance Procedure

After the first 5 hours

• Change the engine oil.

After the first 100 hours

• Check the wheel hub slotted nut torque specifications.
• Check the wheel lug nuts.

After the first 250 hours

• Change the hydraulic filter.

Before each use or daily

• Check the engine oil level.
• Check the mower blades.
• Check the safety interlock system.
• Check the rollover protection system (roll bar) pins.
• Check the seat belt.
• Check for loose hardware.
• Clean the engine cooling system.
• Clean the grass build-up from under the deck.

Every 40 hours

• Check the hydraulic oil level.
• Check the tire pressures.
• Check the condition of the belts.
• Grease the height adjustment shaft bearings.
• Grease deck rear struts.

Every 50 hours

• Service the air cleaner. (May need more often under severe conditions. See the Engine

Owner’s Manual for additional information.)

Every 100 hours

• Change the engine oil. (May need more often under severe conditions.)
• Remove the engine shrouds and clean the cooling fins.

Every 160 hours

• Lubricate the brake handle pivot.
• Lubricate the brake rod bushings.
• Lubricate the motion control bronze bushings.
• Lubricate the seat switch actuator.
• Check the spark plugs.

Every 200 hours

• Grease brake brackets.

25

«
...
23
24
25
26
27
...
»

Содержание Lazer Z HP 465

















































Отзывы:

Нет отзывов

Похожие инструкции для Lazer Z HP 465

Бренд: Cadet Страницы: 40

Бренд: Sears Страницы: 37

Бренд: Yard-Man Страницы: 40

ZT ELITE BZS48KT740

Бренд: Bad Boy Страницы: 36

Бренд: ZIPPER MASCHINEN Страницы: 65

Greens Super 55

Бренд: Ransomes Страницы: 76

Бренд: Tanaka Страницы: 57

eclipse 2 InCommand

Бренд: Jacobsen Страницы: 86

Бренд: Bush Hog Страницы: 1

PowerMax 32/18V

Бренд: Gardena Страницы: 182

Бренд: MTD Страницы: 20

Бренд: Lastec Страницы: 51

PARK 13-6113-56

Бренд: Stiga Страницы: 2

Бренд: McCulloch Страницы: 28

Бренд: Neuton Страницы: 56

Бренд: OREC Страницы: 39

Бренд: Lastec Страницы: 53

Бренд: hillvert Страницы: 210

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды