Exmark ARX440CKC24000 Скачать руководство пользователя страница 40

Страница: 40 / 44

Troubleshooting

Problem

Possible Cause

Corrective Action

1. Engine load is excessive.

1. Reduce the ground speed or aeration

depth.

2. Oil level in the crankcase is low.

2. Add oil to the crankcase.

Engine overheats.

3. Cooling fins and air passages for the

engine are plugged.

3. Remove the obstructions from the

cooling fins and air passages.

1. Tire pressure in drive tires not correct.

1. Adjust tire pressure in the drive tires.

Machine pulls left or right (with levers fully
forward).

2. Tracking needs adjustment.

2. See

Motion Control Linkage

Adjustment

in Adjustments section.

1. Drive or pump belt is worn, loose or

broken.

1. Change the belt.

Machine does not drive.

2. Drive or pump belt is off a pulley.

2. Change the belt.

1. Tine(s) is/are bent.

1. Install new tine(s).

2. Tine mounting bolt is loose.

2. Tighten the tine mounting bolt.

3. Engine mounting bolts are loose.

3. Tighten the engine mounting bolts.

4. Loose engine pulley or idler pulley.

4. Tighten the appropriate pulley.

5. Engine pulley is damaged.

5. Contact an Authorized Service Dealer.

6. Belt is damaged.

6. Install new belt.

Abnormal vibration.

7. Chains are not properly tensioned.

7. See

Drive Wheel Chain Tension

Adjustment and Tine Drive Chain
Adjustment

in Adjustments section.

1. Return-to-up springs are not properly

adjusted.

1. See

Return-to-Up Springs Adjustment

in the Adjustments section.

2. Return-to-up springs are damaged.

2. Replace springs.

Tines do not raise.

3. Short in harness.

3. Contact an Authorized Service Dealer.

1. Electronic depth control is set too shallow.

1. Increase electronic depth control setting.

2. Tine down pressure setting is too low.

2. Increase tine down pressure.

3. Harness/switch is damaged.

3. Contact an Authorized Service Dealer.

4. Auxiliary reservoir is low on oil.

4. Add oil to reservoir.

5. Park brake is engaged.

5. Disengage the park brake.

Tines do not engage the ground.

6. Tine ground engagement switch is locked

out.

6. Unlock tine ground engagement switch.

Содержание ARX440CKC24000













































Результаты поиска

Содержание ARX440CKC24000

Отзывы:

Похожие инструкции для ARX440CKC24000

Бренды по названию

Популярные бренды

Exmark ARX440CKC24000, Руководство оператора

Результаты поиска

Содержание ARX440CKC24000

Отзывы:

Похожие инструкции для ARX440CKC24000

Бренды по названию

Популярные бренды