Maintenance
the discharge gate so it closes properly and
completely.
Adjustments
Note:
Disengage PTO, shut off engine, wait for
all moving parts to stop, engage parking brake, and
remove key before servicing, cleaning, or making any
adjustments to the unit.
Handle Adjustment
The handle allows the gate to be held in any position.
Adjust the tension of the pivot bolt and nut as shown
in Figure 15 for more or less resistance.
g285775
Figure 15
1.
Pivot bolt and nut
Discharge Gate Adjustment
•
Closed Position
The discharge gate is properly adjusted in the
closed position when the discharge gate is flat
against the discharge opening.
If the discharge gate does not close flat follow the
steps below:
1.
Stop engine, wait for all moving parts to stop,
and remove key. Engage parking brake.
2.
Place the handle in the closed position, refer
to
Closing the Discharge Gate
in the
Operation section.
3.
Unlock the Operator Controlled Discharge
accessory assembly and pivot it away from the
mower deck.
15
