Form No. 3392-399 Rev A
42in Mulching Kit
Zero-Turn-Radius Riding Mower
Model No. 131-7709
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the mower.
2
No parts required
–
Remove the blades.
Baffle
1
Carriage bolt (5/16 x 3/4 inch)
1
Flange nut (5/16 inch)
6
Blade
2
3
Kicker plate
1
Install the kit.
4
Mulching mower blade
2
Install the blades and mower.
WARNING
While maintenance or adjustments are being made,
someone could start the engine. Accidental starting
of the engine could seriously injure you or other
bystanders.
Remove the key from the ignition switch, engage
parking brake, and pull the wires off the spark plugs
before you do any maintenance. Push the wires
aside so they do not accidentally contact the spark
plugs.
Note:
Determine the left and right sides of the machine
from the normal operating position.
1
Preparing the Mower
No Parts Required
Procedure
1.
Stop the engine and remove the ignition key.
2.
Remove the mower as described in your
Operator's
Manual
.
3.
Turn the mower upside down.
4.
Remove and retain the existing discharge baffle and
mounting hardware as shown in
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3392-399* A
