Contrast
Press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust contrast. Increasing contrast will make
white area of the video picture brighter. Contrast works in conjunction with “Brightness”.
Brightness
Press“
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust brightness. Adjusting brightness to
enhance the level of dark area in the video picture such as night scenes and shadow scenes. Increasing
brightness will make dark areas more visible.
Backlight
Press “
▲/+” or “▼/-“
to select “ High / Medium / Low / Min “ to adjust backlight. “High” level will make the
backlight in most light, the “Min” will minimize the backlight.
Color Temp.
Select the Color Temp.” for white balance. Press “Menu/Enter” to enter color temp. option. There are 4
settings to choose from (1)Standard (2). Warm (3).Cold (4) User. To select “User” you may press “
▲/+” or
“▼/-“
to increase/decrease the “Pink bar” to adjust color of Red, Green and Blue.
Clock
Use Clock to fine-tune the monitor when phase value is wrong. Press “Menu/Enter” and press “
▲/+” or “▼/-
“
to increase/decrease the “Pink bar” to adjust the Clock.
Phase
Use phase to fine-tune the monitor to perfectly ADC clock phase synchronize to the video signal source
under RGB mode. Press “Menu/Enter” and press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to
adjust the Phase.
H-Position
Use to change horizontal position of the picture. You may press “Menu/Enter” and press “
▲/+” or “▼/-“
key
to select “H-Position” . Press “
▲/+”
key to increase “Pink bar” to shift the picture to right or press
“▼/-“
to
decrease “Pink bar” to shift the picture to left.
V-Position
Use to change vertical position of the picture. You may press “Menu/Enter” and press “
▲/+” or “▼/-“
key to
select “V-Position” . Press “
▲/+”
key to increase “Pink bar” to shift the picture up or press
“▼/-“
to decrease
“Pink bar” to shift the picture down.
Auto Adjust
Use “Auto Adjust” to fine-tune the display to perfectly synchronize to the video signal source under RGB
mode.
Press “Menu/Enter” and press “
▲/+” or “▼/-“
to activate “Yes” the Auto Adjust function.
19
