7. OSD Setup
Picture (Video / HDMI Mode)
1. Press the “Menu/Enter” key on the buttons to call out
the OSD“ Menu” . Press “
▲/+” or “▼/-“
to select
“Picture” mode and press “Menu/Enter” key again to
access into item option . Press “
▲/+” or “▼/-“
to
select item you want to adjust.
2. Various picture settings are available from the “Picture”
menu. Use“
▲/+” or “▼/-“
to select item that you want
to adjust and press “Menu/Enter” key again until yellow
bar changes to pink bar and press “
▲/+” or “▼/-“
increase or decrease the figure that you wish . Press
“Source/Exit” key to return to menu and confirm the setting.
Press two times of “Source/Exit” to exit all the menu.
Contrast
Press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust contrast. Increasing contrast will make
white area of the video picture brighter. Contrast works in conjunction with “Brightness”.
Brightness
Press“
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust brightness. Adjusting brightness to
enhance the level of dark area in the video picture such as night scenes and shadow scenes. Increasing
brightness will make dark areas more visible.
Tint
Press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust hue. Using hue to adjust the color of flesh
tones. Increasing figure will make the picture with more red in appearance. Decreasing figure will shift the
picture with more green in appearance.
(Remark). No tint adjustment under HDMI mode
Saturation
Press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust color saturation. Increasing color figure will
make the color more intense. Reducing color figure will make the color less intense.
Sharpness
Press “
▲/+” or “▼/-“
to increase/decrease the “Pink bar” to adjust sharpness. Using sharpness to adjust the
detail enhancement to the video picture. Increasing the figure will enhance the edges of objects in the
video picture. Decreasing the figure will reduce enhancement.
12
