ORCA-50 UHF Demo Manual V1.0
7 Eximia Srl
–
www.eximia.it
- www.rfidstore.it
The following will be one by one on how to carry out the label access operation
。
1.3.1 Read the label operation
The parameters of the read tag are entered in the interface shown below
：
The read tag needs to enter three parameters: the label area to be read, the start address and the data
length. Note that here the starting address and
The data length units are WORD, which is 16 bit double bytes. When the parameter is set, click the Read
tab button.
It should be noted that the input parameters to meet the specifications of the label, otherwise there will
be an error
。
When the operation completes successfully, the feedback shown below appears
：
