ORCA-50 UHF Demo Manual V1.0
18 Eximia Srl
–
www.eximia.it
- www.rfidstore.it
1.6Other settings of the reader
1.6.1Monitor the operating temperature
In the high-intensity continuous use of the reader, it will produce heat, the user can through the built-in
temperature sensor to monitor the reader internal operating temperature, to avoid overheating (operating
temperature of more than 65 degrees Celsius). If the temperature is too hot, you can stop reading and
writing labels for a period of time
。
The operating interface for monitoring the temperature is as follows
：
1.6.2 Set the buzzer status
The buzzer provides the user with the sound information of the reader's use status.
The user can turn the buzzer off or set it to sound every time the label is saved.
It can also be set to sound every time a label is read, but this will result in a reduction in the efficiency of
multi-tag recognition. This feature is more
Is applied in the test label or reader occasion
。
The operation interface is as follows
：
It should be noted that the success of the self-test after the buzzer sound is not controlled by this
