Exido 243-015, Руководство пользователя

Страница: 20 / 33

for 40 seconds. The browning level cannot be
adjusted. Once the bread will be heated, you will
hear a signal (ten short beeps), and the bread
pops up.
DEFROST
Bread can be defrosted by pressing the activation
handle (2) down and pressing the DEFROST
button (5). You will hear a signal, the red indicator
lights at the side of the CANCEL and (4)
DEFROST will light up, and an extra 45 seconds
will be added to the normal toasting time for the
selected browning level. Once the bread is
defrosted, you will hear a signal (ten short beeps),
and the bread pops up.
Important
• If a slice of bread gets stuck during toasting,
you must remove the plug from the socket.
• Wait until the toaster has cooled down and
then push the activation handle (2) up and
down a few times to loosen the slice of
bread.
• If this does not succeed, you can try turning
the toaster upside down and carefully shake
the bread loose.
• Never use a metal object to loosen the
bread.
Toasting buns and large pieces of bread
• Place the toasting stand (9) above the toaster
by placing the pegs beneath the stand in the
openings (1). Then place the bread to be
toasted on the stand.
• Adjust the browning level and press the
activation handle (2) down as for normal
toasting.
• Please note that this form of toasting is less
powerful than normal toasting and it
therefore takes longer to toast the bread.
Tips
The toaster can toast, reheat and defrost many
different types of bread. It is not possible to
recommend a browning level for all types of bread
as it very much depends on the composition of
the bread and personal taste. Use trial and error
to see what works. Thick slices of bread, buns
and coarse bread need to be toasted longer than
thin slices of bread and light bread.
CLEANING
• Remove the crumb tray (8) from the toaster,
and clean away any crumbs, etc. Remember
to replace the crumb tray.
• Turn the toaster upside down and shake it
carefully to remove any crumbs. The toaster
should be emptied of crumbs regularly.
• Wipe the exterior with a dry or slightly damp
cloth.
• Do not use any kind of strong or abrasive
cleaning agent.
• Never use a steel brush or scrubbing brush
to clean the toaster. The surface may be
damaged and the brush bristles may break
off and get stuck in the toaster’s electrical
parts, thus ruining the toaster.
ENVIRONMENTAL TIPS
Once any electronic product is no longer
functional, it should be disposed of in such a way
as to cause minimum environmental impact, in
accordance with the regulations of your local
authority. In most cases you can take such
products to your local recycling station.
20
243015_IM 16/04/04 13:28 Side 20